OPTIONAL
EQUIPMENT
Additional Cost to Models Above |
LOW OVERHEAD CLEARANCE FEED FRAME |
8400.00 |
Feed Frame Sheave Mount |
895.00 |
MAST (includes quick disconnect) |
21 ft from base of frame to sheave |
4935.00 |
26 ft from base of frame to sheave |
5860.00 |
Hinged sheave assembly |
420.00 |
Underside sheave |
420.00 |
CATHEAD -
8" diameter |
2825.00 |
HOIST (includes cable) |
Hydraulic (w/brake) 2000# capacity |
3360.00 |
Hydraulic (w/brake) 3000# capacity |
3475.00 |
Hydraulic (w/brake) 5000# capacity |
5160.00 |
Hydraulic (w/brake) 7000# capacity |
5400.00 |
Hydraulic (w/brake) 10000# capacity w/high speed reverse |
7300.00 |
Hydraulic (wireline) 900# capacity |
3360.00 |
HYDRAULIC SLIDE BASE |
1710.00 |
HYDRAULIC SIDE TO SIDE SLIDE |
3415.00 |
WATER PUMP ASSEMBLY |
Moyno 3L6 (w/2-speed motor) |
7800.00 |
Moyno 3L8 (w/2-speed motor) |
10200.00 |
FMC L0918 (425) |
9500.00 |
FMC L1122B (435) |
11550.00 |
SP50 Hose Pump |
11000.00 |
Standpipe |
390.00 |
HIGH RISE PUMP MOUNT |
760.00 |
Two 36" tool boxes mounted under high rise pump mount |
580.00 |
WATER TANK |
250 gal. capacity |
1525.00 |
500 gal. capacity |
2800.00 |
Luggage rack on top of water tank |
325.00 |
HYDRAULIC LEVELING JACKS - 4"
X 36" stroke |
2 rear |
3730.00 |
1 front |
2625.00 |
HYDRAULIC ROD HOLDER & BREAKOUT
WRENCH |
NW rod to 6" casing |
7995.00 |
AUTOMATIC SPT HAMMER guide tube mount |
8600.00 |
Side Cylinder Mount |
10300.00 |
DRILL PLATFORM -
includes running lights and reflectors |
(2) underbody tool boxes L & R
(2) above deck auger and rod racks L & R
(1) underbody 10 ft. rod box & tool storage |
for 108" CA trucks |
6950.00 |
for 120" CA trucks |
7300.00 |
One underbody auger rack and one large tool box in place of standard tool boxes (3-1/4,
4-1/4, or 6-1/4 HSA) |
675.00 |
Two underbody auger racks in place of standard tool boxes (3-1/4,4-1/4, or 6-1/4 HSA) |
1100.00 |
Rod rack under water tank |
370.00 |
Drillers step |
550.00 |
Vertical drop hammer rack |
395.00 |
Manual hinged underbody auger rack in place of tool box |
1325.00 |
Hydraulic underbody auger rack in place of standard tool box (includes small tool box and
bulkhead) |
2100.00 |
Bulkhead |
920.00 |
Tool box 24" |
235.00 |
Tool box 36" |
290.00 |
Tool box 48" |
420.00 |
SPINDLE ADAPTER (purchased with new rig) |
Upper (NWJ/4-1/4" Box/NWJ) |
940.00 |
Lower (4-1/4" Pin/U-joint/1-5/8"Hex) |
330.00 |
Hydraulic chuck or fluted kelly with
automatic pulldown option available |
OPTIONAL SAFETY FEATURES AVAILABLE |
CATHEAD BRAKE |
2500.00 |
CARRIER/MAST INTERLOCK SYSTEM(U.S. Patent No.
5,647,442) |
1200.00 |
DRILLERS SAFETY BARRIER(U.S Patent No. 5,360,072) |
POR |
ALTERNATE SPINDLE MOTOR(U.S. Patent No, 5,524,713) |
POR |
